JVC HR-S9400E Instructions Manual page 64

Auto Set Up
The Auto Set Up function sets the tuner channels, clock and Guide Program numbers
automatically.
BEFORE YOU START PLEASE MAKE SURE THAT:
The TV aerial cable is connected to the ANT.IN jack on the rear panel of the video recorder.
The video recorder's mains power cord is connected to a mains outlet.
The video recorder is turned off.
Load batteries into the remote control.
1
Press (recorder/remote).
Press PUSH JOG %fi (remote) to select the international
2
telephone country code.
(Ex.) DEUTSCHLAND is selected.
If you have selected a country code other than 32
(BELGIUM) or 41 (SUISSE), go to step 3.
If you have selected 32 (BELGIUM) or 41 (SUISSE),
press OK (remote) and select the language code by
pressing PUSH JOG %fi (remote), then go to step 3.
(Ex.) FRANCAIS is selected for BELGIUM
International Telephone
Country Code
3
Press OK (remote). Do NOT press any button on the video recorder or remote control until the current
time appears.
During Auto Set Up
* Once you have performed Auto Set Up, even if the recorder's memory backup has expired, the
recorder will not perform Auto Set Up again.
FOR MORE INFORMATION SEE INSTRUCTIONS/P6
COPYRIGHT © 1997 VICTOR COMPANY OF JAPAN, LTD.
– referring to the display panel
Language Code
Auto Set Up completed
VICTOR COMPANY OF JAPAN, LIMITED
International Telephone Country Code
SUOMI : 358 SUISSE
PORTUGAL : 351 ITALIA
DEUTSCHLAND : 49 ESPAÑA
NORGE : 47 BELGIUM
SVERIGE : 46 NEDERLAND : 31
DANMARK : 45 GREECE
ÖSTERREICH : 43 OTHERS
* Depending on the model, the selectable codes
may be limited.
Language Code for the HR-S9400E
ENGLISH : 01 ITALIANO
DEUTSCH : 02 NEDERLANDS : 05
FRANCAIS : 03
Language Code for the HR-S9400EH
ENGLISH : 01 CASTELLANO
DEUTSCH : 02 NEDERLANDS : 05
FRANCAIS : 03
If "CH1" or "– –:– –"
appears on the display
panel, see page 7 of
the instructions.
E/EH
EN
: 41
: 39
: 34
: 32
: 30
: - -
: 04
: 04
Printed in Japan
0697HOV * UN * VP