A Word On Copier Installation - Toshiba DP1200 Service Manual

DP1200/1500
[5]
UNPACKING AND INSTALLATION

1. A WORD ON COPIER INSTALLATION

Improper installation may damage the copier. Please note the
following during initial installation and whenever the copier is
moved.
Do not install your copier in areas that are:
damp, humid, or very dusty
exposed to direct sunlight
poorly ventilated
subject to extreme temperature or humidity changes, e.g.,
near an air conditioner or heater.
Be sure to allow the required space around the machine for
servicing and proper ventilation.
8"(20cm)
4"
(10cm)
2. CHECKING PACKED COMPONENTS AND
ACCESSORIES
Open the carton and check if the following components and ac-
cessories are included.
Copier
3. UNPACKING
Unpack the copier and carry it to the installation location by
holding the handles on both sides of the copier.
4. REMOVING PROTECTIVE PACKING
MATERIALS
1) Remove pieces of tape (a), (b), (c), (d) and (e) and protec-
tive cover (f). Then open the original cover and remove
protective materials (g) and (h).
a
f
b
5 – 1
8"(20cm)
4"
(10cm)
Power cord
Operation manual
(CD-ROM : DP1200 Only)
Drum cartridge
(installed in copier)
c
g
e
d
h