Gateway Profile 4 Service Manual page 58

11
Turn the inverter board over, then unplug the cable that connects the
inverter board to the scaler board.
12
Remove the inverter board from the computer.
Tips & Tricks
13
Plug the cable from the scaler board into the new inverter board.
14
Hold the new inverter board by its edges and align it with the screw holes
on the computer, then attach the two screws to the new board.
Warning
15
Place the LCD panel back onto the computer.
16
Reattach the scaler board cable to the LCD panel.
Mark or label the removed board as "defective" to prevent
confusion with the new board.
Do not press or apply pressure to the inverter board's
components or plastic shields.
www.gateway.com
Replacing the LCD panel inverter board
53