Gateway Profile 4 Service Manual page 88

49
Align the access panel tabs into the case notches.
50
Swing the access panel down into place and secure it with the two screws
removed in Step 5.
51
Return the computer to the upright position.
52
Connect the drive cables to the drive adapter card on the drive pack using
the notes you made in Step 4. The drive cables and connectors are "keyed,"
which means that they can only be plugged in one way.
53
Push the cables carefully up into the top of the drive bay.
Access panel tabs
www.gateway.com
Replacing the system board
83