Make Sure That All Of The Internal Cables Are Arranged Inside The Case So They Will Not Be Pinched When You Close The Case - Gateway Profile 4 Service Manual

Replacing Components in Your Gateway Profile 4
5
If you are removing a memory module from the memory module bank,
gently pull the plastic tabs away from the sides of the memory module
and remove it.
- OR -
If you are adding a memory module to an empty memory module bank,
gently pull the plastic tabs away from the sides of the memory module
bank.
6
Align the notch on the new memory module with the notch on the
memory module bank and press firmly into the bank. The tabs on the sides
of the memory module should secure the memory module automatically.
When the module locks into place, you hear a click.
7
Make sure that all of the internal cables are arranged inside the case so
they will not be pinched when you close the case.
34 www.gateway.com