4
Remove the paper feed roller module, holding up the paper feed case along the groove of the feed cover
to pull the claw out of the case.
A – Claw
B – Groove
C – Paper Feed
Case
5
Install the new paper feed roller module with its gear on the right.
•
Hang both ends of the paper feed roller module.
•
While slightly lifting the paper feed roller module, pass the claw along the groove of the feed cover.
•
Attach the bearings at both ends of the paper feed roller module into the guide grooves of the chassis.
42
A – Chassis
B – Bearings
C – Green Levers