Bell and Howell Sidekick 1200 Operator Maintenance page 4

3
Use the roller cleaning paper to remove dirt from the surfaces of the retard roller, paper feed roller,
separation roller, six drive rollers and six free rollers. Also, remove dust on the paper sensors (Paper
detector, Waiting sensor, Starting position sensor) and reflector sheets with a cotton swab.
•
When wiping off dust or dirt from the roller surfaces, hold the rollers to prevent them from rotating, and
wipe the rollers all the way around, proceeding from one end to the other in the direction of the arrows
shown below.
Paper Detector
Retard Roller
Drive Rollers
Reflector Sheets
Drive Rollers
37
A – Waiting Sensor
B – Paper Feed Roller
C – Separation Roller
D – Free Rollers
E – Starting Position Sensor
F – Free Rollers