Placing Calls On Hold; Placing Conference Calls - Inter-Tel Axxess User Manual

P C
LACING ALLS
To place a call on hold:
Perform a hookflash and dial
1.
Hang up or place another call.
2.
To return to a call that is on hold:
Lift the handset or perform a hookflash.
1.
Dial
2.
3
P C
LACING ONFERENCE
With the Conference feature, you can establish a conference call with up to three
intercom and/or outside parties (four, including you).
To place a conference call:
While on a call, perform a hookflash and dial
1.
Place another call, then hookflash and dial
2.
place one more call on hold.)
Hookflash and dial
3.
During the conference call, you can do the following:
•
To drop out of the conference: Perform a hookflash and hang up. This removes
your phone from the conference, but leaves the other parties connected. To return
to the conference, lift the handset and dial
•
To place all of the parties on individual hold without returning to the conference:
Lift the handset and dial
10
O H
N OLD
3
.
3 6
C
ALLS
again to join all of the calls together in the conference.
5
3 3
.
3 6
.
5
. (If necessary, repeat this step to
5
.
5
.
6
Axxess Single-Line Phone User Guide