DataCard select series User Manual page 99

Install the printer
6
7
8
9
10 Use the default name for the printer or enter a name of your choice. Click Next.
11 Select the port to which the printer is connected and click Next.
12 Select whether this printer should be the default printer.
13 Click Next to copy the files to the PC and update entries to enable the printer.
14 The installation program detects whether the Adobe Acrobat Reader program is
User's Guide for Select™ Platinum Series™ Printers
Figure 7-9: SmartDriver installation dialog box
Click Next on the first Printer Driver Setup dialog box.
E
The installation program automatically detects the operating system on your
PC and selects the driver for that operating system.
Review the License Agreement and click Yes to continue.
E
If you used a different sequence to start installation, you might have a slightly
different sequence of prompts.
The installation program displays a question asking whether you would like to
view the Release Notes. Do one of the following:
– Click Next to continue.
– Click Yes and then Next to open the Release Notes in WordPad. Close the
Release Notes when you have viewed the information.
Choose the e-Guides to install. You can choose the Magna e-Guide, the Select
e-Guide, ImageCard IV e-Guide, or the SP35 e-Guide. Install the Select e-Guide.
(You can install additional e-Guides if you are likely to use more than one type of
printer with this PC.) Click Next to install the e-Guide(s) you selected.
E
Select only one port for printer connection.
E
The small page size for cards might cause unexpected results with some
applications if the Select printer is the default.
installed on the PC. If it is not, the installation program asks if you want to install
7-13