Table of Contents
Advertisement
Using the printer
3
4
5
6
User's Guide for Select™ Platinum Series™ Printers
–
Set the orientation for the card design—either portrait or landscape.
–
Set the magnetic stripe format and coercivity if you plan to encode magnetic
stripe data.
–
For a shared printer, choose the Ribbon Type to match the ribbon installed in
the printer. (Do not use the autodetect setting.)
Using the application's page setup feature, set the following:
–
Set the paper size to CR80 Card 2.13" x 3.38".
–
Set all the margins to the same value as the driver. (You can set the margins
in the application wider than the driver, if desired.)
–
Set the orientation for the card design—either portrait or landscape.
Format the text to print using only a TrueType (
(solid black) panel of the print ribbon, choose the Black color in the application. All
other colors are printed using the color panels of the print ribbon (if you use a
color print ribbon).
To print on the front of the card, keep data on one page. To print the front and back
of the card, send a two-page document. (Make sure Print on Both Sides is set to
Automatic or Manual.)
To encode magnetic stripe data, do one of the following:
–
Also on the front of the card, enter the information to be encoded on the
magnetic stripe and format the text using one of the following fonts:
•
Track 1—Magnetic Stripe
•
Track 2—Magnetic Stripe
•
Track 3—Magnetic Stripe
•
Track NTT—Magnetic Stripe (use only on a PC running a Japanese
language Windows operating system)
–
If your application does not allow you to select fonts, use magnetic stripe
escapes to identify data. See "Magnetic stripe encoding" on page D-1 for
details.
E
You must select the SmartDriver as the printer in the application for magnetic
stripe fonts to be visible. In addition, Windows must be set to display all fonts.
(Some PC's are set to display TrueType fonts only.) See Windows help for
more information.
E
The text should use a small type size to keep characters on the same line. In
many applications, you can type a smaller value, such as 4 points, for the type
size. To view the characters in a small type size, zoom in on the text. Also,
follow these guidelines:
•
Avoid formatting characters, such as tabs and returns, in the data for one
magnetic stripe track. In some cases, these characters are converted to
spaces, which might not be valid characters for the track.
•
Do not use typographic features, such as letter spacing, on magnetic
stripe text.
) font. To print using the K
2-11
Advertisement
Table of Contents
