DataCard select series User Manual page 14

1-8
Back of the printer
Figure 1-5
If the printer includes an optional duplex module, that module extends farther than the
ports and receptacles.
Find the following on the back of the printer:
Data Port
The printer includes two data ports. Select only one data port to use.
•
•
Power switch
Use the Power switch to power on or power off the printer.
Power receptacle
This is the receptacle for connecting the power cable.
shows the back of the Select printer:
Figure 1-5: The back of the Select printer
ECP parallel port
Use the ECP parallel port to connect the printer's data cable to the PC, if the
printer was ordered with a parallel cable.
USB data port
Use the USB data port to connect the printer's data cable to the PC, if the printer
was ordered with a USB cable.
Contactless smart card port*
ECP parallel data port
USB data port
Contactless smart card port*
Contact smart card port*
Power switch
Power receptacle
User's Guide for Select™ Platinum Series™ Printers
Overview
*Optional