DataCard select series User Manual page 40

3-8
•
•
E
Settings that control the non-printing operation of the printer are in the Properties
dialog box for the printer. These settings include:
•
•
•
E
Use the Properties dialog box
Make sure the printer power is on and the printer is connected to the PC.
1
2
3
4
Cleaning interval
Magnetic stripe encoding formats and coercivity
If you use a card creation application specifically designed to create cards, that
application might include settings with cards that override driver settings.
Port to which the printer is attached
Permissions for other users of the PC
Printer sharing
The SmartDriver provides help for the Default Document Properties dialog box,
and Windows NT provides help for the Properties dialog box. Help provides
information about specific settings of the printer driver. Help does not include step-
by-step procedures or detailed conceptual information.
Select Start from the Windows NT taskbar.
From the Windows NT Start menu, select Settings and then Printers. The Printers
window appears.
Click once on the SmartDriver icon.
Select File from the Printers menu bar, and then select Properties. The
SmartDriver Properties dialog box appears.
Figure 3-5: Properties dialog box, Windows NT
User's Guide for Select™ Platinum Series™ Printers
Using the printer driver