DataCard select series User Manual page 135

3
4
5
User's Guide for Select™ Platinum Series™ Printers
Figure C-3: Ports dialog box
Choose the Settings button to display the port settings.
i
If the PC has more than one serial port, make sure you view the settings for
the serial port to which the smart card module is attached.
Figure C-4: Settings dialog box
Choose the following settings:
Setting Value
Baud rate 9600
Data bits 8
Parity None
Stop bits 1
Flow control None
When the settings are correct, click OK to save settings and close the dialog box.
♦
C-7