DataCard select series User Manual page 50

4-4
2
3
4
5
Press down on the swing arm until it clicks (step 1 in Figure 4-3). The push latch
releases the swing arm. Lift the swing arm until it is fully open (step 2 in
Figure 4-3).
Figure 4-3: Open the swing arm
Remove the print ribbon cartridge.
Lift the continuous cleaning roller unit out of the printer (step 1 in Figure 4-4).
2
Figure 4-4: Lift the roller out of the printer
Slide the used sleeve off the cleaning roller spindle (step 2 in Figure 4-4). Discard
the used sleeve.
2
1
1
User's Guide for Select™ Platinum Series™ Printers
Maintaining the printer