Grill Installation - Travis Industries 564 Installation Manual

Optional Equipment

Grill Installation

Certain faces allow for installation of an upper and lower grill. Follow the directions below to install.
Upper Grill Installation (FPX and Avalon)
Hold the grill at an angle and insert the
lower slot over the lower bushing on
the fireplace (both sides)
Lower Grill Installation
Hold the grill at an angle and insert the lower
slot over the bushing on the fireplace (both
sides). You may need press on the grill to get
the tab over the bushing (this prevents the
grill from accidentally falling off).
© Travis Industries
Swing the grill upwards to engage the upper slot. You
will need to lift the grill slightly to get it over the bushing.
Once in place the grill is held in place by gravity.
Bend the tab outward on
both sides. This is the
end-stop for the lower grill,
it allows the grill to swing
forward.
4 0 7 0 6 2 0
(for qualified installers only)
Upper Grill Installation (Lopi)
NOTE: The upper grill is difficult to install the first time - be
patient, after you install it, you will know how it installs and it
will be much easier the second time.
SIDE VIEW
Mounting Stud
Heat Shields
(on fireplace)
Position the grill
so the slots on
the grill align with
the mounting
studs.
Swing the grill upwards to engage
the upper slot. You will need to lift
the grill slightly to get it over the
bushing. Once in place the grill is
held in place by gravity.
Upper Grill
You may need to
The grill, when
push in and
fully inserted,
upwards on the
will slide down
grill as it inserts.
and "click" into
place.
100-01188_000
6 3