Attaching The Cable; Switch Blind Installation - Star TSP700II SERIES Hardware Manual

4-2. Attaching the Cable

Attach the cable cover as shown in the illustration.

4-3. Switch Blind Installation

It is not necessary to install the switch blind. Only install it if it is necessary for you. By installing the switch blind, the
following become possible.
• Preventing the power switch from being operated by mistake.
• Ensuring that other people can not easily operate the power switch.
Install the switch cover as shown in the diagram below.
The power switch can be turned ON ( | ) and OFF (O) by inserting a narrow instrument (ball pen etc.) in the holes in the
switch blind.
- 23 -