Table of Contents
Advertisement
3-7-4. Setting up Auto Connection
uSetting up from the Main Unit for the TSP700II
Note : The following procedure explains how to change the Auto Connection function setting from ON to OFF.
If you want to change it from OFF to ON, please follow the same procedure.
(1) When paper is loaded in the printer and it is turned on, the [POWER] LED(green) on the front of the printer
turns on.
(2) If you hold down the [RST] button on the back of the printer for at more than five seconds, initial operations are
performed in the same way as when the power is turned on, and the LEDs on the front of the printer flash. If you
press the [RST] button when the printer is placed upright, place it horizontally again while the LED is flashing.
(3) The following information is printed. After that, turn the printer off and then back on again to set "Auto Con-
nection" to OFF.
< Current Setting >
Auto Connection : OFF
To enable this setting, turn
Printer Power OFF and turn ON.
(4) To make sure "Auto Connection" is set to OFF correctly, perform self-printing as described in "3-7-3. Confirmation
procedure by self-printing".
Note : Only Bluetooth Firmware Version 2.0 or later allows you to switch ON/OFF by pushing the [RST] button.
The Bluetooth Firmware version can be confirmed by self-printing. (For more information, see "3-7-3.
Confirmation procedure by self-printing".)
u Setting from the Software
After pairing your device and the TSP700II, change "Auto Connection" in the following application provided by our company.
l iOS: Download "Star Setting Utility" from the following Web site.
http://www.star-m.jp/prjump/000003.html
l Android: Download "Star Setting Utility" from the following Web site.
http://www.star-m.jp/prjump/000004.html
l Windows: Download "Star Bluetooth Utility" from the following Web site.
http://www.star-m.jp/prjump/000006.html
RST button
- 16 -
Hide quick links:
Advertisement
Table of Contents
