Table of Contents
Advertisement
Chapter 3 Part Names and Microscopy Procedures(With DIH-M Mounted)
6
Switch on power for the C-Box
and Epi-illumination light source.
(Note that the shutter for the
Epi-illumination is closed
automatically.)
7
Press the hand switch to open
the shutter of the
Epi-illumination and center the
lamp. (Refer to the lamp
operating manual.)
8
Set the 10x objective into the
optical path.
9
Set a specimen and move the
portion to be viewed into the
optical path.
3.4 Epi-fluorescence Microscopy
46
C-Box
power switch
Push to open the shutter.
Select the 10x objective.
Set a specimen and secure in place
using the specimen holder.
Move the portion to be viewed into the
optical path using the XY stage knobs.
Hide quick links:
Advertisement
Table of Contents
