Chapter 2 Part Names and Microscopy Procedures (With Epi-illumination Attachment Mounted)
5
Rotate the excitation method
switchover turret to set it at
position where no filter cube is
installed.
6
Raise the condenser to the
uppermost position.
7
Fully open the field diaphragm
and aperture diaphragm.
(When using the 1-100x condenser, move the top
lens into the optical path.)
8
Set the 10x objective into the
optical path.
2.3 Bright-Field Microscopy
28
Rotate the excitation method
switchover turret.
Raise the condenser using the
condenser focus knob.
Fully open the field
Fully open the
diaphragm using the
aperture diaphragm
field diaphragm knob.
using the aperture
diaphragm lever.
Select the 10x
objective.