2.4 Installation of Optional Cards and Unit
Note
When installing a connector like the type shown below, unscrew the lower hook-pin also.
Then drive both accessory screws.
50-pin
connector
2.
To attach the Amphenol 57JE type (Plug) to the connector, drive the accessory screw into
the upper part.
Fasten the accessory wire tie around the lower hook-pin and the Amphenol 57JE type, as
shown.
Hook-pin
Accessory
wire tie
82
Accessory screw
Amphenol 57JE type
Accessory
screw
Accessory screw
Amphenol 57JE type
Accessory wire tie
57JE type
General Installation