Panasonic KX-TD816 Installation Manual page 80

2.4 Installation of Optional Cards and Unit
Note
• For details about the jack for Power Failure Transfer, refer to Section
• For cable pin numbers to be connected, see "Pin Number Chart" in Section
• For fixing the connector, see "Amphenol 57JE Type (screw-attach-type 50-pin
7.
Tie all of the cords into a bundle. If other cords are exposed in the upper cabinets, tie them
also.
8.
Close the cabinet cover and secure the outside screw.
9.
Cover the cords with the cord holder (included).
10.
Fix the cords to the wall as shown so that the front cover can be opened.
80
2.5.1 Auxiliary Connection for Power Failure Transfer.
2.3.2 Extension Connection and "Pin Number Chart for the KX-TD174" on Page
83.
connector) Connection" on Page 81.
Cord holder
General Installation