Panasonic KX-TD816 Installation Manual page 163

10.
Cover the cords with the cord holder (included).
11.
Fix the cords to the wall as shown so that the front cover can be opened.
Note
If two expansion units are installed, cut the cabinet cover(s) on the lower cabinet(s) to allow
the cords from the upper cabinet to go down through the cabinet cover(s). To protect the cords,
smooth any cut edges.
SAFETY CAUTION for KX-TD144
The small cover which provides access to connectors CN402, CN403, CN404 and CN405 shall
not have its cable knock-out section removed, unless another expansion unit is mounted above
which would prevent finger access via the cable knock-out opening. This safety requirement is
necessary to protect users from network voltages.
DECT Installation
Cord holder
Cut here
5.2 Wireless System Installation
163