Panasonic KX-TD816 Installation Manual page 89

4.
Install the card, secure the screw (included with the unit) and connect the cable to the
connector.
Remote Card
5.
Flatten the cable to replace the inside cover properly.
6.
Replace the inside cover and secure the four screws on the back. Also, replace the side
cover.
7.
Set the MODE switch to 2.
MODE
1
8.
Replace the front cover.
9.
Install the unit to the main unit.
General Installation
Cable
Side View
2
DISA Card
2.4 Installation of Optional Cards and Unit
89