5.2 Wireless System Installation
5.2.3 Installing the Unit
The following procedures can be used to connect Cell Station Interface Unit to the main unit,
and then the Cell Station to the Cell Station Interface Unit.
The KX-TD1232 is illustrated as the main unit.
1.
Loosen the two screws on the cover plate. Insert your fingers into the slits to remove the
cover plate(s).
Slit
Note
Any of the cover plates can be removed as required.
2.
Connect the cabinet cord of the Cell Station Interface Unit to the connector in the main unit
firmly.
158
Slit
DECT Installation