2.4 Installation of Optional Cards and Unit
2.
Insert the plug of the battery adaptor into the battery adaptor connector on the main unit.
Connect the ground wire to the ground terminal on the main unit.
KX-TD816
KX-TD1232
3.
Turn on the power switch of the battery adaptor.
Wall Mounting
1.
Drive the four small accessory screws into the bottom of the unit.
2.
Place the metal plates so that the screw heads insert into the slots as shown.
3.
Slide the metal plates in the direction of the arrows, and drive the screws.
4.
Place the template on the wall to mark two screw positions, and install the big screws into
the wall.
110
Ground Terminal
Ground Wire
To ground
Plug
Ground Terminal
Ground Wire
To ground
Plug
LED
Power Switch
LED
Power Switch
General Installation