Procedure Flow Chart - Panasonic KX-TD816 Installation Manual

5.1 Wireless System Outline

5.1.3 Procedure Flow Chart

Consider the service area required for the
users by referring to Site Planning.
Connect a Cell Station Interface Unit
to the main unit.
Connect a Cell Station (KX-TD142) to the
Cell Station Interface Unit.
Select the display language for your DECT
portable station, if required.
Survey the site for the Cell Station.
Mount the Cell Station on the wall.
Note
• The master CS number must be assigned before using a Cell Station.
<SYS PRG [680]>
150
Refer to Section 5.2.1 Site Planning.
Refer to Section 5.2.2 Location of the Unit and
5.2.3 Installing the Unit.
Refer to Section 5.2.3 Installing the Unit.
Refer to Section 5.2.4 Selecting the Display
Language.
Refer to Section 5.2.5 Site Survey.
Refer to Section 5.2.6 Wall Mounting.
DECT Installation