Panasonic KX-TD816 Installation Manual page 171

Note
• To see the signal strength of more than one Cell Station, the channel for each Cell Station
needs to be set.
• Up to eight Cell Stations can be surveyed at the same time. If more than one Cell Station is
in Radio Signal Test mode, each DIP-Switch channel must be different.
Connecting the AC Adaptor to the Cell Station
After setting the DIP-Switch, connect the AC Adaptor (KX-A11BS1: 230 VAC, 50 Hz) to the
Cell Station.
Note
Only use the AC Adaptor for the Site Survey.
Radio Signal Test using the PS
After locating the Cell Station(s) temporarily, execute the Radio Signal Test using the PS.
The PS scans whether there is a Cell Station that can link with on channel 0 right after entering
the Radio Signal Test mode. The channel to be scanned can be changed by pressing the
appropriate 0 through 9 keys.
1.
Set the PS Power Switch to ON while pressing
at the same time.
Display: FUNCTION<0-4>
2.
Press
• To survey other slots, scroll by pressing
• To survey other channels, enter the channel number (0 through 9).
DECT Installation
.
5.2 Wireless System Installation
(Talk), (Recall) and
(Next) or (Previous).
171