Digital Watchdog SNAP-IT DWC-V4363D Manual page 59

PRIVACY
MASK 1 OFF / ON
MASK 2 OFF / ON
MASK 3 OFF / ON
MASK 4 OFF / ON
MASK 5 OFF / ON
MASK 6 OFF / ON
EXIT JUMP EXIT / SAVE&EXIT / FACTORY SET
SYNC
SYNC MODE INTERNAL / AUTO
0 ~ 199
V_PHASE
EXIT JUMP EXIT / SAVE&EXIT / FACTORY SET
SETUP
CAMERA ID 0 ~ 254 (RS485 ID)
TITLE OFF / ON
DPC
OFF / AUTO
DPC (Dead Pixel Cancellation)
MONITOR CRT / LCD (Select LCD only if the camera is directly connected to LCD monitor.)
LANGUAGE English / Chinese
BAUDRATE 2400 / 4800 / 9600 / 14400 / 19200 / 38400
The protocol is Pelco-D. Fixed and cannot be changed.(Hardcoded onto the DSP.)
OMNI LENS
OFF / 1 ~ 10 (OMNI-Plus Camera Only)
EXIT JUMP EXIT / SAVE&EXIT / FACTORY SET
EXIT
Exit the menu
EXIT
SAVE & EXIT
Exit the menu and save the setting
FACTORY SET Reset the menu setting to factory default
59