Locomotive Switch Function Overview; Switch Overview - Lionel Powered F7 B-Unit Diesel Locomotive Owner's Manual

Locomotive switch function overview

Switch overview

Command Reverse Unit Switch
Used to assign an ID# and reprogram the locomotive in LEGACY and Command operation
when the switch is in the "PGM" position. Also used to "lock" your locomotive in a single
direction, or neutral, in conventional operation when the switch is placed in the "PGM"
position. See pages 14, 16, and 23.
Smoke Unit Switch
Used to turn the smoke unit function "on" and "off". See page 22.
Odyssey II Speed Control System Switch
Used to turn the Odyssey II Speed Control System "on" and "off". See pages 18 and 20.
Command reverse
unit switch
Smoke unit switch
Figure 1. Switch location
RUN
PRG
SMK
NO SMK
Odyssey II Speed Control
System switch
ODY
NO ODY