Locomotive Switch Function Overview; Switch Overview - Lionel USRA 0-8-0 Steam Locomotive and Tender Owner's Manual

Locomotive switch function overview

Switch overview

T
he locomotive's switches are illustrated in Figure 2 and described below.
Command Reverse Unit Switch
Used to assign an ID# and reprogram the locomotive in LEGACY and Command operation
when the switch is in the "PROG" position. Also used to "lock" your locomotive in a single
direction, or neutral, in conventional operation when the switch is placed in the "PROG" posi-
tion. See pages 17, 18, and 21.
Smoke Unit Switch
Used to turn the smoke unit function "on" and "off". See page 31.
Odyssey II Speed Control System Switch
Used to turn the Odyssey II Speed Control System "on" and "off". See pages 20, and 23.
REAR
Odyssey II
Speed Control
System switch
Figure 2. Switch locations
Command reverse
unit switch
PROG RUN
SMOKE
OFF ON
Smoke unit switch
11
FRONT