Locomotive switch function overview
Switch overview
Command Reverse Unit Switch
Used to assign an ID# and reprogram the locomotive in LEGACY and Command operation
when the switch is in the "PROG" position. Also used to "lock" your locomotive in a single
direction, or neutral, in conventional operation when the switch is placed in the "PROG"
position. See pages 16, 17, and 20.
Smoke Unit Switch
Used to turn the smoke unit function "on" and "off". See page 30.
Odyssey II Speed Control System Switch
Used to turn the Odyssey II Speed Control System "on" and "off". See pages 19, and 22.
Odyssey II Speed
Control System
switch
Command reverse
unit switch
Figure 2. Switch locations
1149-250 UP BB Lnmstr-3.indd 11
FRONT
11
Smoke switch
4/13/10 8:16 AM