Locomotive Switch Function Overview; Switch Overview - Lionel GP-38-2 Owner's Manual

Locomotive switch function overview

Switch overview

Command Reverse Unit Switch
Used to assign an ID# and reprogram the locomotive in LEGACY and Command operation
when the switch is in the "PGM" position. Also used to "lock" your locomotive in a single
direction, or neutral, in conventional operation when the switch is placed in the "PGM"
position. See pages 18, 19, 20, and 23.
Smoke Unit Switch
Used to turn the smoke unit function "on" and "off". See page 34.
LEGACY RailSounds Sound System Switch
Used to turn the LEGACY RailSounds sound system "on" and "off". When the switch is in the
"NO SND" postion, the horn and bell are still active. See page 27.
Odyssey II Speed Control System Switch
Used to turn the Odyssey II Speed Control System "on" and "off". See pages 22, and 24.
LEGACY RailSounds sound
system switch
Command reverse unit
switch
Figure 1. Switch locations
SND NO SND
RUN PGM
FRONT
Smoke unit switch
SMK
NO SMK
ODY NO ODY
Odyssey II Speed Control
System switch
11