Locomotive Switch Function Overview; Switch Overview - Lionel Allegheny Steam Locomotive Owner's Manual

Locomotive switch function overview

Switch overview

Program / Run Switch
Used to assign an ID# and reprogram the locomotive in LEGACY and Command operation
when the switch is in the "PROG" position. Also used to "lock" your locomotive in a single
direction, or neutral, in conventional operation when the switch is placed in the "PROG"
position.
Smoke Unit Switch
Used to turn the smoke unit function "on" and "off". This switch controls the stack and the
whistle.
Odyssey II Speed Control System Switch
Used to turn the Odyssey II Speed Control System "on" and "off".
Figure 7. Switch locations
10