Locomotive switch function overview
Switch overview
Command Reverse Unit Switch
Used to assign an ID# and reprogram the locomotive in LEGACY and Command operation
when the switch is in the "PGM" position. Also used to "lock" your locomotive in a single
direction, or neutral, in conventional operation when the switch is placed in the "PGM"
position. See pages 18, 20, and 23.
Smoke Unit Switch
Used to turn the smoke unit function "on" and "off". See page 34.
LEGACY RailSounds Sound System Switch
Used to turn the LEGACY RailSounds sound system "on" and "off". When the switch is in the
"NO SND" postion, the horn and bell are still active. See page 27.
Odyssey II Speed Control System Switch
Used to turn the Odyssey II Speed Control System "on" and "off". See pages 22, and 24.
Command reverse unit
switch
Smoke unit switch
Figure 1. Switch locations
FRONT
RUN
PGM
SMK
NO SMK
LEGACY RailSounds
sound system switch
11
Odyssey II Speed Control
System switch
ODY
NO ODY
SND
NO SND