Dinette/Bed Conversion - Winnebago Impulse User Manual

SECTION 9 –
FURNITURE AND SOFTGOODS
3. Arrange dinette cushions to cover bed area.
Bed to Dinette
1. Reattach the table onto the wall support and
lower the table leg.
2. Make sure that the table leg is secured into the
floor support bracket and the leg brace is
locked.
9-4
Wall
Support
Table
Bracket

DINETTE/BED CONVERSION

(Dream Dinette
™
Mechanism)
–If Equipped
(Typical view – your coach may differ)
Dinette to Bed
1. Release the lock rod (located on the bottom of
the table) by turning the lock rod clockwise.
2. Lift the dinette cushions upward and push
table straight down.
3. Secure the lock rod (located on the bottom of
the table) by turning the lock rod counter-
clockwise.
Table