Tv Antenna - Winnebago Impulse User Manual

Impulse winnebago
Hide thumbs Also See for Impulse:
Table of Contents

Advertisement

SECTION 8 –
ENTERTAINMENT
300-Watt DC-AC Power Inverter
• Turn Inverter On to operate TV.
• Low Battery indicator will light if 12V house
batteries are becoming drained. (Turn Off
inverter to avoid total drain).
• Turn Inverter Off when not in use to avoid
draining house batteries.
• The inverter will shut down when the House/
Coach Battery Disconnect Switch is turned off.
*NOTE: Running high-amperage appliances
like the TV and DVD on inverter power
can drain the house battery rapidly
unless the chassis engine is running so
the alternator can charge the batteries.
Further Information
See manufacturer's information provided in
your InfoCase for more information.

TV ANTENNA

The TV antenna on your motor home can be
easily raised, rotated a full 360° and lowered
from inside the vehicle by simply turning a crank
or directional handle. A built-in signal amplifier
designed to strengthen signals, is controlled by a
power switch built into the optional video
selection box or on a wall plate assembly.
See the antenna manufacturer's operation,
care, and maintenance information in your
InfoCase.
WARNING
Never allow the antenna to touch
electrical power lines or any other
electrical wires.
8-6
Raising Antenna to Operating
Position
Turn elevating crank clockwise in "UP"
direction until some resistance to turning is noted
(approximately 13 turns). Antenna is now in
operating position.
Turn amplifier power switch "ON" to receive TV
signal.
Rotating Antenna for Best Picture
Make sure antenna is in the "UP" position.
Pull down on directional handle using both hands
until it disengages ceiling plate and rotate for best
picture and sound on TV set.
Lowering Antenna to Travel
Position
Rotate antenna until pointer on directional
handle aligns with pointer on ceiling plate.
Turn elevating crank (counter-clockwise) in
"DOWN" direction until resistance is noted
(approximately 13 turns). Antenna is now locked
in travel position. Turn amplifier power switch
"OFF".

Advertisement

Table of Contents
loading

Table of Contents