Winnebago Access Impulse Operation Manual
Winnebago Access Impulse Operation Manual

Winnebago Access Impulse Operation Manual

Audio-video system
Hide thumbs Also See for Access Impulse:

Advertisement

DVD HOME THEATER
SYSTEM
–If Equipped
The available DVD home theater
system operates from 120-volt AC
household current only, so you must
have either the shoreline connected, the
generator running, or the inverter turned
on (if equipped).
The TV is connected to the home
theater system, which plays through
theater speakers in the lounge area of the
coach.
Turn TV and DVD player ON.
Press
FUNCTION
button on front
of TV or
remote and
select HDMI1
input.
TV screen will
display DVD player logo when
correct input is selected.
Play Dvd with Theater
Sound
Insert DVD into player. DVD will
begin to load automatically. TV
screen will typically show
"READING" or "LOADING".
DVD may load
directly to main
title/menu screen
or it may begin to play previews. You
may be able to skip previews if
desired by pressing the PRESET+
button until you see the main menu
screen.
When main menu
screen appears, use
arrow buttons on
remote to select
desired entry or press
the center button on remote (or
"Play" button on DVD player) to
begin playing feature.
Volume is adjusted with remote (or
volume buttons on DVD player).
TV Sound Through Home
Theater Speakers
When watching TV programs alone,
the TV normally plays sound through its
own built-in stereo speakers. If you wish
to connect TV stereo sound output to the
home theater speakers for a richer sound
quality, follow these steps:
Turn TV and DVD player ON.
Press FUNCTION button on DVD
player or remote to set DVD player to
TV CABLE.
Use TV Menu button to set TV audio
output to "Variable Audio Output".
This routes TV stereo sound output
through home theater system.
> Audio (turn speaker Off)
> Setup (change to Variable)
Select TV channels and adjust
volume with remote for either the TV
or DVD.
NOTE: Turn the volume level up
significantly on the DVD player
when using the home theater as
an amp for the TV through the
stereo system.
DVD PLAYER
(Without Home Theater)
–If Equipped
The DVD player is connected to the
TV and plays through the TV stereo
speakers or the deluxe sound rear radio
speakers in the lounge area of the coach.

Set TV Sound Output

Use the TV Menu button to set TV
audio output to
Variable Audio
Output
. (See TV owner's manual for
instructions.) This will connect TV
stereo sound output to the deluxe
speakers in the lounge area.
Continued—

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Access Impulse and is the answer not in the manual?

Questions and answers

Summary of Contents for Winnebago Access Impulse

  • Page 1 screen will typically show This routes TV stereo sound output DVD HOME THEATER “READING” or “LOADING”. through home theater system. SYSTEM > Audio (turn speaker Off) • DVD may load > Setup (change to Variable) directly to main –If Equipped title/menu screen •...
  • Page 2 DVD remote to select the desired entry or press the ENTER or PLAY buttons on the remote (or “Play” Part No. 161501-13-002 Rev. 1301120416 button on DVD player) to begin Copyright 2012 Winnebago Industries, Inc. playing the feature. All rights reserved.

This manual is also suitable for:

Access

Table of Contents