Table of Contents
Advertisement
•
Press INPUT/SOURCE
button on front of TV or
remote and select
"VIDEO 1" input.
TV screen will display
DVD player logo when
correct input is selected.
Play DVD with Theater Sound
•
Insert DVD into player. DVD will begin to
load automatically. TV screen will typically
show "READING" or "LOADING".
•
DVD may load directly to main
title/menu screen or it may begin
to play previews. You may be
able to skip previews if desired
by pressing the NEXT (CH+ /
CH-) button until you see the main menu
screen.
•
When main menu screen
appears, use arrow buttons on
remote to select desired entry
or press OK or PLAY buttons
on remote (or "Play" button on
DVD player) to begin playing feature.
•
Volume is adjusted with remote (or volume
buttons on DVD player).
TV Sound Through Home Theater
Speakers
When watching TV programs alone, the TV
normally plays sound through its own built-in
stereo speakers. If you wish to connect TV stereo
sound output to the home theater speakers for a
richer sound quality, follow these steps:
•
Follow DVD home theater steps for power
and TV input setup.
•
Turn TV and DVD player ON.
•
Press FUNCTION button on DVD player or
remote to set DVD player to "AV IN".
•
Use TV Menu button to set TV audio output to
"Variable Audio Output" (see TV owner's
manual.) This routes TV stereo sound output
through home theater system.
•
Select TV channels and adjust volume with
remote for either the TV or DVD.
NOTE: Turn the volume level up significantly on
the DVD player when using the home
theater as an amp for the TV through the
stereo system.
DVD PLAYER
(Without Home Theater)
–If Equipped (with swing-out TV)
The DVD player is connected to the TV and
plays through the TV stereo speakers or the
deluxe sound rear radio speakers in the lounge
area of the coach.
Provide 12V Power
The TV and DVD player operate on 12-volt
DC current.
•
Turn on the 12-volt master power
(TV) switch (located on the video
cabinet near the TV).
NOTE: When the TV is not in use,
the TV master power switch should
be turned off to avoid drain on the
12-volt house battery.
Set TV Sound Output
•
Use the TV Menu button to set TV audio
output to
Variable Audio Output
owner's manual for instructions.) This will
connect TV stereo sound output to the deluxe
speakers in the lounge area.
•
Volume is adjusted with the TV remote or
volume buttons.
Set TV Video Input
•
Turn TV and DVD player ON.
•
Press the SOURCE or INPUT button on the
TV or TV remote to select "INPUT 1" or
"AV1".
SECTION 8 –
ENTERTAINMENT
. (See TV
8-3
Advertisement
Table of Contents
