Table of Contents
Advertisement
SECTION 3 –
DRIVING YOUR MOTOR HOME
Mirror Adjustment Control
• Mirror surface tilts in direction
of arrow button pressed.
• Middle switch selects L or R
mirror to adjust.
• Center position is "neutral" to
disable arrow buttons and
prevent misadjustment of
mirrors.
The mirrors can be folded back
against the cab doors if needed.
Mirror Head Adjustment
If you cannot adjust a mirror properly using
the control switch, the mirror may need a coarse
adjustment by rotating the mirror head.
3-4
Mirror Heat
Switch
Unscrew protective cap and
loosen Allen head set screw
Allen Head Set Screw*
MIRRORS – POWER SIDEVIEW
EXTERIOR
–If Equipped
Always adjust mirrors for maximum rear
visibility before driving off. Make sure the seat is
adjusted for proper vehicle control and that you
are sitting back squarely into the seat.
The mirrors may also contain heating
elements to de-fog or de-ice the mirror glass
during cold weather operation. An ON-OFF
switch for the mirror heaters is located near the
remote mirror controls.
The ignition switch must be on to operate
mirror controls and heaters.
Mirror Pivot Lock
Advertisement
Table of Contents
