Dvd Player With Deluxe Sound - Winnebago VIEW 24D User Manual

Table of Contents

Advertisement

SECTION 8 –
ENTERTAINMENT
4. Select TV channels and adjust volume using
the TV remote.
Further Information
See the manufacturer's quick reference guide
provided in your InfoCase for complete feature
descriptions and operating instructions.
DVD PLAYER WITH DELUXE
SOUND
–If Equipped
The DVD Player is a selectable function of the
multi-featured audio system. The player unit
contains DVD/CD, MP3, AM/FM, USB, and
Bluetooth Stereo. It also accepts portable audio
player inputs and functions as an alarm clock.
This stereo receives Bluetooth streaming
audio from Bluetooth enabled audio sources such
as a cellphone.
The player is connected directly to the TV and
can output sound to either the stereo speakers in
the TV or to the Deluxe Sound speakers in the
lounge area of the coach.
Refer to the manufacturer's information
provided in your InfoCase for complete feature
descriptions and operating instructions.
Interior Speaker System
Interior Speaker Switch
"SPEAKER A"
To connect or disconnect the interior speaker
system, press SPEAKER A.
Set TV Video Input
Turn TV and Radio/DVD player ON.
Press the MODE button on the TV or the
SOURCE button on the remote to select
"INPUT 2".
8-2
The TV screen will
display the DVD player
logo when the correct
input is selected.
Play DVD
Insert a DVD "face up" into slot on lower face
of the player.
The DVD will begin to load automatically.
The TV screen will typically display
"Reading" or "Loading".
The DVD may load directly to the main
title/menu screen or it may begin to play
previews. You may be able to skip previews if
desired by pressing the "Next" button on the
DVD remote until you see the main menu
screen.
When the main menu screen
appears, press the "Enter"
button on the remote or
"Play/Pause" button on DVD
player to begin playing the main feature. Use
the arrow buttons on the DVD remote to select
another feature to play.
Volume is adjusted with the DVD remote.
TV Sound through Deluxe Sound
Speakers
When watching TV programs alone, the TV
normally plays sound through its own built-in
stereo speakers. If you wish to connect TV stereo
sound output to the Deluxe Sound speakers for a
richer sound quality, follow these steps:
1. Turn the TV ON.
2. Make sure the Interior Speaker System is ON.
3. Press the AUX input selection button (located
just below the display on the face of the Radio/
DVD Player.) This will route the TV stereo
sound output through the Radio/DVD Player
and out to the Deluxe Sound speakers.
4. Select TV channels and adjust volume using
the TV remote.

Advertisement

Table of Contents
loading

This manual is also suitable for:

View 24gView 24vView 24j

Table of Contents