Table of Contents
Advertisement
The WPS push-button configuration provides a semi-automated configuration
method. The WPS button on the front panel of the router can be used for this
purpose or the Web User Interface (WUI) can be used exclusively.
The WPS push-button configuration is described in the procedure below. It is
assumed that the Wireless function is Enabled and that the router is configured as
the Wireless Access Point (AP) of your wireless LAN. In addition, the wireless client
must also be configured correctly and turned on, with WPS function enabled.
NOTE:
The wireless AP on the router will search for WPS clients for 2 minutes. If
the router stops searching before you complete Step 5, then return to
Step 4 and try again.
st
Step 4: 1
method: WPS button
Press the WPS button on the front panel of the router. The WPS LED will
blink to show that the router has begun searching for WPS clients.
nd
2
method: WUI virtual button
From the WUI, select the Push-Button radio button in the WSC Add Client
section of the Wireless Security screen. Then click the Add button.
37
Advertisement
Table of Contents
