Table of Contents
Advertisement
QoS
Shows if IP QoS is enabled or disabled
VlanId
VLAN ID is used for VLAN Tagging (IEEE 802.1Q)
State
Shows the connection state of the WAN connection
Remove
To remove a connection select the radio button in this column and
click the Remove button under the table.
Edit
Used to edit connections
STEP 2: Adjust the VPI/VCI settings for the connection you wish to establish.
Select Enable Quality Of Service if required. Click Next to continue.
Step 3: Select IP over ATM (IPoA) and click Next. The following screen
appears.
25
Advertisement
Table of Contents
