Table of Contents
Advertisement
NOTE:
NAT is enabled above so UPnP is shown (see underlined notes below).
Consult the field descriptions below for more details.
IP Address: Enter the IP address for the LAN port.
Subnet Mask: Enter the subnet mask for the LAN port.
Enable UPnP: Tick the box to enable Universal Plug and Play.
This option is hidden when NAT disabled or if no PVC exists
Enable IGMP Snooping: Enable by ticking the checkbox.
Standard Mode:
ports when no client is subscribed to a multicast group.
Blocking Mode:
blocked and not flood all bridge ports when no client is subscribed
to a multicast group.
DHCP Server:
To enable DHCP, select Enable DHCP server and enter starting
and ending IP addresses and the leased time. This setting
configures the router to automatically assign IP, default gateway
and DNS server addresses to every PC on your LAN.
DHCP Server Relay: Enable with checkbox and enter DHCP Server IP address.
Configure the second IP address by ticking the checkbox shown below.
IP Address: Enter the secondary IP address for the LAN port.
Subnet Mask:
In standard mode, multicast traffic will flood all bridge
In blocking mode, the multicast data traffic will be
This allows the Router to relay the DHCP packets to the
remote DHCP server. The remote DHCP server will provide
the IP address. This option is hidden if NAT is enabled
Enter the secondary subnet mask for the LAN port.
10
Advertisement
Table of Contents
