Comtrend Corporation CT-5365 Quick Start Manual page 37

Step 1: Select WPA-PSK, WPA2-PSK or Mixed WPA2/WPA-PSK network
authentication mode from the Manual Setup AP section of the Wireless
Security screen. The example below shows WPA2-PSK mode.
Step 2: Enter a WPA Pre-Shared Key and click the Save/Apply button. You will
see the following dialog box if the Key is too short or too long.
Step 3: The WSC Add Client section should now appear, as shown below.
IIa. PUSH-BUTTON CONFIGURATION
36
Steps
1 & 2