Single Dynamic Configuration (Bridging); Setup Wan Port - Comtrend Corporation CT-5365 Quick Start Manual

3.3 Single dynamic configuration (bridging)

3.3.1 Setup WAN port

Follow these steps to configure the WAN interfaces.
STEP 1: To Add a new WAN connection, click the Add button.
Heading Description
VPI/VCI ATM VPI (0-255) / VCI (32-65535)
Con. ID WAN connection ID number
Category ATM service category
Service Name of the WAN connection
Interface Name of the interface for WAN
Protocol Shows the connection type
IGMP Shows enable or disable IGMP proxy
QoS Shows if IP QoS is enabled or disabled
19