Table of Contents
Advertisement
Step 1: Obtain an updated software image file from your ISP.
Step 2: Enter the path and filename of the firmware image file in the Software
File Name field or click the Browse button to locate the image file.
Step 3: Click the Update Software button once to upload and install the file.
NOTE: The update process will take about 2 minutes to complete. The device will
reboot and the browser window will refresh to the default screen upon successful
installation.
NOTE: It is recommended that you compare the Software Version at the top of
the Device Info Summary screen (see graphic below) with the firmware version
installed, to confirm the installation was successful.
3.8 Save and Reboot
This function saves the current configuration settings and reboots the device.
NOTE: You may need to reconfigure the TCP/IP settings after rebooting. For
example, if the DHCP server is disabled Static IP settings must be configured.
NOTE: If you lose all access to the web user interface (WUI), you may need to close
the browser, wait for two minutes, and then restart the WUI.
If this does not work, then press the reset button on the rear panel of the
device for 5-7 seconds to restore to default settings.
44
Advertisement
Table of Contents
