Table of Contents
Advertisement
STEP 1: Tick the DSL Auto-connect checkbox on the Quick Setup screen.
STEP 2: Click Next to start the setup process. Follow the on screen prompts.
STEP 3: After setup is complete, the device will reboot with the following shown.
NOTE:
After the device reboots, the ¡Error! No se encuentra el origen de la
referencia. screen should appear. If the browser does not refresh
automatically, close it and restart. You will need to login again. If you
encounter difficulty, be sure to check the IP configuration
Manual Quick Setup
To setup the router manually follow these instructions.
STEP 1: Select Quick Setup from the main menu and uncheck the DSL
Auto-connect checkbox to begin the manual quick setup process.
13
Advertisement
Table of Contents
