Table of Contents
Advertisement
STEP 8: Click Save/Reboot to apply these settings. The configuration will be
saved to flash memory and then the device will reboot. After the device
reboots, the Web UI should refresh the browser window. If the browser
does not refresh, restart the browser and login again.
3.2.2 Setup Access control
The Access Control option under the Management menu bar configures access
related parameters in three areas: Services, IP Addresses, and Passwords. Use
Access Control to control local and remote management settings for the device.
Services
The Services option limits or opens the access services over the LAN or WAN. These
access services are available: FTP, HTTP, ICMP, SNMP, SSH, TELNET and TFTP.
Enable a service by ticking its checkbox. Click Save/Apply to activate.
17
Advertisement
Table of Contents
