Walking Cos - Panasonic KX-TDA50G Feature Manual

Hybrid ip-pbx
Hide thumbs Also See for KX-TDA50G:
Table of Contents

Advertisement

20.1.1 Walking COS

20.1 W
20.1.1 Walking COS
Description
A user can enter his extension number and extension personal identification number (PIN) (® 5.1.6 Extension
PIN (Personal Identification Number)) at another extension, to make the following types of call using his Class
of Service, including TRS level, overriding the other extension's Class of Service.
CO line call
TIE line call
Intercom call
External Relay Control (® 5.1.8 External Relay)
After performing Walking COS, the following features are also available for the specified extension:
Call Forwarding (FWD)/Do Not Disturb (DND) setting (® 4.1.9 DND (Do Not Disturb), ® 6.1.6 FWD (Call
Forwarding))
Incoming Call Distribution Group Log-in/Log-out (® 9.1.3 ICD Group Features—Log-in/Log-out)
Absent Message setting (® 1.1.1 Absent Message)
Extension Dial Lock (®5.1.4 Extension Dial Lock)
Time Service—Changing the Time Mode (day/lunch/break/night) (® 17.1.5 Time Service)
CLIP number setting (CLIP ID) (® 3.1.13 CLIP (Calling Line Identification Presentation))
Conditions
When a CO line call is made using Walking COS:
the Class of Service of the specified extension is applied (® 3.1.19 COS (Class of Service))
the Itemized Billing code of the specified extension is applied (® 1.1.3 ARS (Automatic Route
Selection))
the specified extension number is recorded on SMDR as the call originator, instead of the extension
number of the actual extension used (® 16.1.1 SMDR (Station Message Detail Recording)).
Walking COS is also available through DISA. (® 4.1.7 DISA (Direct Inward System Access))
Extension PIN
An extension personal identification number (PIN) is required to use this feature (® 5.1.6 Extension PIN
(Personal Identification Number)). If the wrong PIN is entered three times, the line will be disconnected.
This feature can not be used for extensions which the extension being operated is prevented from calling
by Internal Call Block. (® 9.1.14 Internal Call Block)
PC Programming Manual References
4.8 [2-6-1] Numbering Plan—Main—Features—
4.11 [2-7-1] Class of Service—COS Settings—Extension Feature—
6.1 [4-1-1] Wired Extension—Extension Settings—Option 2—
6.10 [4-2-1] Portable Station—Extension Settings—Option 2—
PT Programming Manual References
[005] Extension Personal Identification Number (PIN)
348
Feature Manual
User Remote Operation / Walking COS / Verification Code
Remote Operation by Other Extension
Extension PIN
Extension PIN
Document Version 2008-11

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kx-tda100Kx-tda200Kx-tda50Kx-tda600

Table of Contents