Panasonic KX-TDA50G Feature Manual page 310

17.1.5 Time Service
Time Mode Switching
Automatic
Manual
2.
Time Table
Each tenant has a Time Table that is used when the tenant is in Automatic Time Service Switching mode.
Each Time Table has four basic modes—day, lunch, break, and night—and also provides for multiple
"breaks", such as morning breaks and afternoon breaks, and multiple "days", such as the morning shift
and the afternoon shift following lunch.
A tenant's Time Table is programmed to control when each time mode starts (and therefore, ends) and
can be programmed separately for each day of the week.
Each Time Table has a number which corresponds to the tenant number of the tenant it serves. (Tenant
1 uses Time Table 1, etc.)
[Programming Example: Time Table]
Time Schedule
MON Day 1
Lunch
Day 2
Break 1 start
Break 1 end
Break 2 start
Break 2 end
Night
TUE Day 1
[Visualization of Time Schedule for Tenant 1]
Monday
00:00
Time Table No. 1
Note that in this example, the day mode (Day 2) resumes automatically when the break mode (Break 1)
ends.
310 Feature Manual
Description
The current time mode will switch
automatically to another time mode at
the time programmed in the tenant's
Time Table, and can be switched
manually by pressing the Time
Service button or by dialing the Time
Service Switch feature number.
The current time mode will switch only
when the Time Service button is
pressed or when the Time Service
Switch feature number is dialed.
Time Table No. (Tenant No.)
1 2 3
09:00 15:00 11:00
12:00 18:30
13:00 19:00
15:00 20:30
15:15 20:45
22:30
22:45
18:00 01:00 22:00
09:00 15:00 11:00
03:00 06:00 09:00
Night Day 1
The current time mode (day/lunch/
break/night) and the switching mode
(automatic/manual) can be switched
manually by an extension assigned
as a manager, or by an extension
whose Class of Service (COS) is
authorized.
4
12:00
15:00
18:00
06:00
21:00
21:15
06:15
12:00 15:00 18:00
Lunch Day 2 Break 1
Condition
Tuesday
21:00 00:00
Night
Document Version 2008-11